|
|
Post by comiccop63 on Oct 24, 2015 8:41:34 GMT -5
Was told can not install tv bracket on wall no studs back there anyone got a idea?
|
|
|
|
Post by lynnmor on Oct 24, 2015 9:51:55 GMT -5
The wall has no studs, usually there is a thin piece of steel sheet metal right behind the wall panel meant to support a small TV. You should have had a sticker on the wall just inside the entry door marking the location of that sheet metal. Look at your floor plan online. Get a strong magnet and slide it over the wall to see where it might stick. Use sheet metal screws to attach the mount, and then only if you can locate the steel.
|
|
|
|
Post by comiccop63 on Oct 27, 2015 10:08:32 GMT -5
Thank you for the information the trailer in storage will check for sheet metal in the spring
|
|
drb
Newbie RV’er
Posts: 6 
|
Post by drb on Oct 28, 2015 6:55:08 GMT -5
Have spree 2015 Dealer installed 24" tv to right of entrance door. TV hook ups are on ceiling at that location
|
|
|
|
Post by comiccop63 on Oct 29, 2015 11:15:56 GMT -5
Had trailer at dealer was told cant mount tv on that wall yes cable connection and power outlet on ceiling
|
|
|
|
Post by johnr on Oct 29, 2015 11:35:36 GMT -5
Get a magnet like lynnmor suggests. It should only locate the steel plate and shouldn't stick to anything else in the walls because the rest is made of aluminum.
|
|
drb
Newbie RV’er
Posts: 6
|
Post by drb on Oct 29, 2015 18:31:46 GMT -5
mine installed it there and I have traveled all over with it and had no problems
|
|
|
|
Post by vagov on Oct 29, 2015 21:14:41 GMT -5
Plan on doing the same on my 196s soon
|
|
|
|
Post by pipeliner on Nov 2, 2015 21:03:21 GMT -5
The wall has no studs, usually there is a thin piece of steel sheet metal right behind the wall panel meant to support a small TV. You should have had a sticker on the wall just inside the entry door marking the location of that sheet metal. Look at your floor plan online. Get a strong magnet and slide it over the wall to see where it might stick. Use sheet metal screws to attach the mount, and then only if you can locate the steel. This is spot on. Excellent advise. |
|
