Bike rack / generator on rear bumper 261 rks

I have a 2013 spree 261 rks. I found that by my experience it does not work to put 2 bikes on bumper. So, what I did is welded a 1/4 L-bracket on the inside frame to bumper on each side. You only need one L-bracket on each side. I moved the spare tire over to the right and modified it so it doesn't block the tail light (cut and re-welded spare tire mount). Then I mounted a receiver in the center of bumper that will accept my bikes and/or my generator. Very stable and had no problems. If you need more support which I doubt, then add 2 more L- brackets one on each side of frame. If you are not a welder spend the extra money and get it done that way you will not be sorry and its one less worry. Hope this helps! Good luck!



Toolman