|
Post by toysrus on May 9, 2015 19:03:27 GMT -5
Hi All. I am claiming ignorance as far as trailering goes. I made the leap from motor coach to 5th wheel toy hauler. When I fire up the generator, I do not get 120 volt power to any of the receptacles. Is there a plug or a switch that I should be activating? When plugged into shore power, everything works. I have an Onan 5500, so there is plenty of power, but it is not being distributed. Thanks.
|
|
|
Post by ronc on May 23, 2016 18:08:37 GMT -5
You should get 120 V AC on the genny. Have you checked all the circuit breakers? The gen set usually two, they are located in the generator enclosure. Open it up and make sure they aren't tripped. Go back to you dealer or the person you bought it from ... bet they can answer your question quickly.
|
|