KZ 14fkth - what DC circuits are std.

Was unable to get any support from the manufacture or original selling dealer. Decided that I was going to mess something up or fix it. Luckily I've fixed it.

The power panel has 6 DC,fused circuits. 1 and 2 were not labeled. 3-6 were. #1 would blow a fuse as soon as it was installed. Tried to get help from the original dealer and manufacturing company. Decided today I was going to get to the bottom of the issue or mess something up. Finally decided I had to un-attach the power/fuse box panel and slide it out to see what I could see.


ound that 2 wires were not attached to anything. That would lead u to believe they were the 2 un-identified circuits ,1 and 2 would be unattached/unused. After loosening the circuit board to see which color of wire were attached to what circuit #. Found that the #1 wire laying close to the ground block and must have been touching it as they did not insulate either of the 2 end of wires for the un-used power taps. The one to circuit 3 was un-attached but circuit 2 was being used. So at the factory they hooked up the wrong wire and or miss labeled the circuit legend.


So now have circuit 3 open and hooked circuit #1 to a 12v DC power source.