|
|
Post by patandbarry on Sept 28, 2024 12:43:32 GMT -5
Does anyone have information on how to manually operate the slide out in a 261 RBI KZ 2021 connect. The name of the slide out is NXG.BAL When we try to open it, it made Grounding noise and seems one slide is operating slower. It will only open one foot before it stops. Thanks!
|
|
Mark T
Weekender RV’er
Shorter days ahead
Posts: 57
|
Post by Mark T on Oct 1, 2024 23:22:30 GMT -5
 On the door side of the trailer frame, about 2.5 ft ahead of the forward wheel, find the nut poking out of the frame. |
|
WrkrBee
Weekender RV’er
Retired
Posts: 87
|
Post by WrkrBee on Oct 4, 2024 20:10:27 GMT -5
On the door side of the trailer frame, about 2.5 ft ahead of the forward wheel, find the nut poking out of the frame. Common sense says there should be a big red arrow pointing to the nut and labeled. |
|
|
|
Post by Edd505 on Oct 5, 2024 23:13:50 GMT -5
Your manual should give instructions for emergency operation.
|
|
|
|
Post by rvcouple on Oct 11, 2024 19:30:43 GMT -5
I'm assuming you are looking for how to retract the slide so you can take the trailer in to have it repaired. As others have said, the procedures are in the manual. If you try to continue extending it after the motor stops, you may not be able to retract it again, even with the manual operation. There is obviously a mechanical failure some place.
|
|
joerone
Newbie RV’er
New to the RV life
Posts: 13 
|
Post by joerone on Oct 14, 2024 15:00:50 GMT -5
I have a Venture Stratus (Venture is owned by KZ) and there is a manual crank to move the slide in. It is located on the opposite side of the rig look under the frame in-line with the slide rail. You will see a rod with a 3/4 (I think) nut on the end. That is the manual crank, my dealer told me you will be ratcheting a while if you don't have a drill  www.youtube.com/watch?v=wwVuPkJ_epojoerone 2023 Venture Stratus SR281VBH 2021 GMC Sierra 3500 AT4 |
|
