|
|
Post by cajunkzowne4 on Aug 30, 2023 8:21:02 GMT -5
Having problems removing the television out of its case in my 2007 KZ Escalade. There are no hardware anywhere around the top both sides or bottom of the television which leads me to believe that it is hooked up from the back which I cannot find access for. Any help will be greatly appreciated thanks will Abshire. Lake Charles Louisiana
|
|
|
|
Post by wahoo on Sept 14, 2023 9:31:31 GMT -5
Answered this question on another post, did you see it?
That Sony TV is held in place by a bracket...four lock nuts can be loosened from the front of the TV using a 7/16 or 11mm socket and approx. 10 inches of extension and a ratchet. Although a high end TV in its time, they have become a little long in the tooth. I just replaced mine with a 43 inch class 4k LED. A sound bar fills in the rest of the cavity nicely. If you wanted a larger screen, an articulating mount could be used to extend outside the cavity. The old Sony is probably over 50lbs so they installed it well.
Additionally, there is an access panel in the storage to the left of the tv. Look for four screws in the corners of the side....remove them and you have access to the left side of the TV...helps you understand how is is mounted.
|
|
