|
|
Post by flhtci2006 on Jun 5, 2023 23:47:07 GMT -5
Primarily on half tons, what kind of gaps do you typically see between your slide and the outside wall? (Say, taken halfway up the slide) Mine are about 13/16 to 15/16 at the middle from the outer edge of the molding to the rv wall.
2022 D256RKT
|
|
|
|
Post by 660catman on Jun 6, 2023 11:51:12 GMT -5
My D250RES is about 7/8” consistent on the rear side. On the lead side it about 7/8” at the top and about 13/16 at the bottom.
|
|
17600
Weekender RV’er
Posts: 80
|
Post by 17600 on Jun 8, 2023 8:01:25 GMT -5
I have a D290RLT it is about 7/8" on all sides with the exception of the driver side rear and that is only about 7/16". Really a little tighter than I think it should be.
|
|
|
|
Post by flhtci2006 on Jun 8, 2023 18:55:16 GMT -5
So, I take it that +/- 7/8" is the norm.
|
|
|
|
Post by 660catman on Jun 8, 2023 19:29:44 GMT -5
I would tend to agree
|
|
