|
Post by trampin on May 11, 2023 11:44:39 GMT -5
Hello. I need to replace some of the blinds on my 2019 Sportsman SE. The best way to do this would be to remove the decorative box like component that covers the head piece. I believe decorators call them a cornice. I can't figure out how they are attached to the wall. It appears that they may have been built-in-place then covered with carpet. Any advise?
|
|
|
Post by nvguy on May 11, 2023 21:48:58 GMT -5
What I have found is the screws are driven thru the fabric, which then closes over the screw heads. With a bit of gentle probing you should be able to find them. Also, sometimes a philips will work but for best results you will probably need a number 2 square drive.
|
|
|
Post by trampin on May 14, 2023 10:51:55 GMT -5
Thank you, I'll give it a try. Seems that most all the screws on this unit are #2 square drive which in my opinion is a good thing.
|
|