|
Post by milpol4523 on Apr 12, 2023 9:54:59 GMT -5
I have a 201 KZ 331 TH 12 as seen in the attachment. I need some direction on how to lubricate (aka grease) the front landing gear as it is making a god awful snapping and crunching noise when I try to level it. a couple issues with this is: 1. the off door side leg is inaccessible due to the generator bay sheet metal and 2. the door side does not appear to have a removable cap or any grease points that i can get to, or 3. is it the motor making that noise the trailer gets moved a couple times a year so its something i can do this summer. Thanks in advance Earl Attachments:
|
|
|
Post by johnr on Apr 13, 2023 6:57:35 GMT -5
|
|
|
Post by nvguy on Apr 13, 2023 23:54:53 GMT -5
From the Lippert site, this is from the Ground Control, but the jacks are pretty similar: Preventive Maintenance 1. For optimum performance, the system requires full battery current and voltage. The battery must be maintained at full capacity. 2. Check the terminals and other connections at the battery, the controller, and the jacks for corrosion, and loose or damaged connections. 3. Remove dirt and road debris from jacks as needed. 4. If jacks are down for extended periods, it is recommended to spray exposed leveling jack rods with a silicone lubricant every three months for protection. If the trailer is located in a salty environment, it is recommended to spray the rods every 4-6 weeks. Here is a link to the Lippert site, specifically the landing legs Lippert
|
|