|
|
Post by newfulltimer on Jan 29, 2023 19:32:25 GMT -5
I bought a 2020 Durango Gold G391RKQ last year. It was pretty much new. I parked it and have been living in it ever since. Now that I am trying to move. One of the main slides will not come in. 2 of the 3 slides come in but not the 3rd. Are they not all suppose to slide at the same time? Any ideas on issue? Batteries are good.
|
|
|
|
Post by nvguy on Jan 29, 2023 22:33:59 GMT -5
If you have hydraulic slides & one switch for all the slides then they wont slide in at the same time, they come in according to which one has the least resistance, then the next one and so on. Is the pump running? Have you checked the hydraulic fluid level?
|
|
|
|
Post by Edd505 on Jan 29, 2023 23:11:22 GMT -5
If you have hydraulic slides & one switch for all the slides then they wont slide in at the same time, they come in according to which one has the least resistance, then the next one and so on. Is the pump running? Have you checked the hydraulic fluid level?   |
|
|
|
Post by newfulltimer on Jan 29, 2023 23:23:46 GMT -5
If you have hydraulic slides & one switch for all the slides then they wont slide in at the same time, they come in according to which one has the least resistance, then the next one and so on. Is the pump running? Have you checked the hydraulic fluid level? I did check fluid and it's low. But I also read that you have to check the fluid when the slides are in and the Jacks are up. I added two quarts and I'm afraid it will be too much now. The two one one side come in and the other one on opposite side doesn't move at all. |
|
|
|
Post by Edd505 on Jan 29, 2023 23:40:38 GMT -5
check the valves, mine are in the battery box, look in the basement at the control board is there a flash code? LCI has a great trouble shooting crew, you can call them 432-547-7378. Your likely over full, plan to catch the extra fluid. This video may help if not make the call in the AM.
|
|
|
|
Post by newfulltimer on Jan 30, 2023 13:57:07 GMT -5
check the valves, mine are in the battery box, look in the basement at the control board is there a flash code? LCI has a great trouble shooting crew, you can call them 432-547-7378. Your likely over full, plan to catch the extra fluid. This video may help if not make the call in the AM.
Thanks this was helpful. I think it's going to be a bad cylinder but cant be for certain. Hopefully can find a repair person out soon. |
|
|
|
Post by Edd505 on Jan 30, 2023 23:18:04 GMT -5
check the valves, mine are in the battery box, look in the basement at the control board is there a flash code? LCI has a great trouble shooting crew, you can call them 432-547-7378. Your likely over full, plan to catch the extra fluid. This video may help if not make the call in the AM.
Thanks this was helpful. I think it's going to be a bad cylinder but cant be for certain. Hopefully can find a repair person out soon. I had a ram go bad but it was an obvious leaking seal. |
|
