|
|
Post by sandiaview on Oct 2, 2021 12:12:47 GMT -5
Does anyone have a suggestion in how to remove the decals that are peeling off my Escape Mini (see photo)? Also looking for suggestions in how best to repair the trim molding (photo)?
Attachments:
|
|
|
|
Post by lynnmor on Oct 2, 2021 17:06:13 GMT -5
Try heating the decals with a hair dryer and slowly pull them off.
That vinyl trim insert is easily removed, there may be a screw at each end. Google for black vinyl trim insert to find a supplier. It comes in various widths, so measure carefully. If you can save a short piece that is a good, you can compare at a dealer or Camping World. When installing, do not stretch, instead push back a little so as to gather some extra, it will shrink over time and if it is stretched it may pull loose. There are a number of YouTube videos that may help.
|
|
|
|
Post by sandiaview on Oct 3, 2021 9:08:51 GMT -5
Thanks, I'll give those a try
|
|
|
|
Post by Edd505 on Oct 8, 2021 14:52:04 GMT -5
what are you going to do with it off, it will be a different color under. Might look in to a wrap. looks like the rubbers torn. Look here for a replacement Rubber Parts |
|
|
|
Post by Chuck on Oct 9, 2021 14:41:04 GMT -5
On removing decals NAPA had decal remover, it works great an dozen't hurt paint  I also agree with Edd, once you remove decal the paint underneath will be far different that the paint that has faded over the years  Don't overdo it, dozen't take much come in spray can an is sort of pricey Chuck |
|
kbrady
Seasonal RV’er
Posts: 171
|
Post by kbrady on Oct 10, 2021 12:11:25 GMT -5
|
|
