|
|
Post by cshaneo74 on May 29, 2021 8:45:36 GMT -5
I recently purchased a 2021 KZ Connect C272FK Luxury Edition. It has an outside cable and/or Satellite Connection. And I am looking at mounting a 42 inch TV to it. Just a tilt mount. Anyone have any experience or know of a guide to Installing? I don't want to hit any wires or anything. Looking for advice.
|
|
|
|
Post by lynnmor on May 29, 2021 9:38:31 GMT -5
Before drilling holes in the trailer, try using the TV on a picnic table, you might find that it is barely usable in bright daylight. Mounted on the trailer doesn't allow movement.
|
|
|
|
Post by Edd505 on May 29, 2021 18:08:27 GMT -5
Friends Class A has one mounted in a bay door, hard to see with out the awning deployed. Worked great nights also with it awning and a gas fire pit in the fall, awning held enough heat to make it comfortable in a sweat shirt on what would have been too cold. I have not seen this in use but seen advertisements and it looked like it would work well, make sure you hit an upright beam behind the Luan Panels.
|
|
Chris RV Living
Seasonal RV’er
Starting to add Boondocking to our camping experience.....
Posts: 133
|
Post by Chris RV Living on Jun 14, 2021 15:15:45 GMT -5
You might be able to use a stud sensor to find the 1x2s that would be in the walls. Since you would need to take it off the trailer to travel, I would look into some kind of free standing collapsible table or stand to hold the TV. Just an opinion.... I wouldn't trust drilling into the side unless I knew there were no wires behind it, and was sure there was something solid to hold the weight of the mount and TV
|
|
