Post by Paisano on Jun 9, 2020 9:54:39 GMT -5
The water pressure in the kitchen hot water is very low. Did replace the faucet due to no water flow. Since it is a new faucet could it be the hot water valve is not set to the full open position? To test if hot water flow is adequate to kitchen faucet would I first shut off water to rig, turn off hot water tank, then open external red hot water valve to drain remaining water in the internal hot water lines. Then disconnect hot water line to kitchen faucet and have it lead to a bucket and then turn on water to rig. Observe flow of water into bucket. If adequate reconnect everything and retest hot water flow for kitchen faucet. If flow is still low, it must then be the faucet valve. Are there any other precautions I should take or other suggestions.
