|
|
Post by fourmom85 on May 27, 2013 18:09:00 GMT -5
We have a new 2013 Spree 323CSS Love it, but have an issue we are unsure how to solve. The couch in the rear slide is free standing. When moving down the highway it has been moving and slamming into the back of the dinette, which has caused the dinette to break free from the side wall and pulled the screws out. (At least we hope this is the issue) is there anyway to stabilize the couch so it doesn't slide around so much?
|
|
|
|
Post by Bill Kitchen, Georgetown On.CA on May 27, 2013 21:07:16 GMT -5
Fourmom85,
This doesn't sound like the couch was installed properly or it was not secured as required for transport. As this is a 2013 still under warranty, I suggest you take it back to the selling dealer for warranty adjustment. Try secure it before the trip to your dealer.
Bill from Georgetown, Ont.
|
|
|
|
Post by fourmom85 on May 28, 2013 11:00:36 GMT -5
Thank you. We will take the Spree back to the dealer. See if they can repair the dinette and secure the couch!
|
|
|
|
Post by schrest on Jun 3, 2013 0:38:39 GMT -5
Hi, we have a 2013 Spree 301 RBS and the couch in our slide out moves as well. It moved off to the edge of the carpet on one trip and we didn't notice. When we put out the slide out, the leg tore the floor!!! Ours is not stationary and we were told that it was not designed to be attached or secured by our dealer. I would secure it myself but I'm worried it will void the warranty. We have to move it back in place against the wall of the slide out before we move the slide out at our destination.
|
|
