|
|
Post by runaway on Apr 5, 2020 9:18:43 GMT -5
Ordered a Durango D301RLT last week. If all goes well it should be here by June. Wish they had this floor plan a year ago. Would of saved me some cash and a lot of problems with the current unit I have now.
Biggest question I have right now is where does one transport the sewer hose since there is no bumper?
|
|
|
|
Post by mkpaint on Apr 5, 2020 10:17:28 GMT -5
I put it in a trash bag in one of the storage areas
|
|
|
|
Post by midlotexan on Apr 5, 2020 11:37:00 GMT -5
Congrats! I have no bumper, but there is a storage tube under the trailer. On mine it is difficult to reach, unless you like being under the trailer, so I use a tote and keep all my sewer fittings together.
I hope you enjoy it!
Kirt
|
|
|
|
Post by RdRmr on Apr 5, 2020 14:41:54 GMT -5
runaway,
I use a plastic 30 lb. chlorine tablet bucket. It's a bit larger than a 5 gal. bucket. Coil the 20' hose up in it and store it in the compartment under the front overhang. Has worked for me for years. I quit using my bumper years ago, kept getting pin holes in the hose, pulling it in and out. Or you can buy the plastic storage tube and attach it under your unit. I use the bucket cause I have access to those all the time. Works for me. Happy Campin....
|
|
|
|
Post by midlotexan on Apr 5, 2020 16:50:19 GMT -5
I use a 5 gallon pail for my fresh water hose. Store the filter and fittings in the center of bucket
|
|
|
|
Post by terreb on Apr 5, 2020 16:54:42 GMT -5
|
|
|
|
Post by Soleman on Apr 5, 2020 18:22:26 GMT -5
runaway,
I installed this in place of the short one installed at the factory.
Valterra Black 50"-94" A04-5094BK EZ Adjustable Hose Carrier-50
|
|
|
|
Post by Edd505 on Apr 5, 2020 20:30:16 GMT -5
I just connect the two ends together to make a big circle and they go to one side of the front comportment with the lego blocks, water hoses connected end to end and to the opposite side. Black flush hose on the side with the sewer hose. Like the holder idea maybe under the back rack.
|
|
|
|
Post by runaway on Apr 6, 2020 8:15:57 GMT -5
Thanks for the replies everyone, didn't know about a tube under the trailer. Was considering a tote, will have to get a bigger one than what I have now so it can hold the hose.
|
|
|
|
Post by laknox on Apr 6, 2020 11:26:50 GMT -5
Ordered a Durango D301RLT last week. If all goes well it should be here by June. Wish they had this floor plan a year ago. Would of saved me some cash and a lot of problems with the current unit I have now. Biggest question I have right now is where does one transport the sewer hose since there is no bumper? I've =always= simply twisted the ends together and put them in a crate or tote. Elbow goes angle-down so no drips. FWIW, I do the same thing, end-to-end, for my water hoses, too. Lyle |
|
