|
|
Post by buckslivin on Aug 19, 2019 8:50:21 GMT -5
When using shower, water follows the outer part of the rim and then leaks down the front corners. It is interesting that this is also where the rim of the pan flattens out towards the front which doesn’t help push the water back in the pan. When saying “front”, I am referring to the side of the curtain. Anyone have a similar issue and any advice on fixing? Thanks for any help. Picture added. photos.app.goo.gl/5MRzv71W6SWSUhV6AEven though this is a KZ-Venture -Sporttrek, this forum has been the best source of information and advice. |
|
|
|
Post by lynnmor on Aug 19, 2019 12:47:06 GMT -5
Looks like just a glob of caulking at each corner would fix the problem, unless I am missing something.
|
|
|
|
Post by buckslivin on Aug 20, 2019 10:37:04 GMT -5
Wish I could just seal it will silicone. The front lip of the pan slightly tilts downward which is encouraging the water to leak forward. Trying to figure out how to lift that front (curtain side) part of the shower pan up a quarter of an inch.
It’s interesting, the pan itself is solid and level. It is as if they tightened down the lip too tight in the front which is pulling the front lip downward....
So net net, just trying to angle the front lip up and tilt back so water flows back into pan...
|
|
|
|
Post by toddbissel on Dec 9, 2019 21:04:46 GMT -5
We have the same shower in our 2020 261RL but with the self retracting shower screen. On our first trip I had the same Issue. I caulked it but that didn’t stop it 100%. While lying in bed I started thinking that perhaps my rig was leaning slightly exacerbating the problem.
I do have small levels on my rig but I decided to whip out my level and check the shower pan and sure enough I had a ever so slight lean. Fixed the lean, fixed the leak.
|
|
