|
|
Post by dragonflight on Mar 1, 2019 13:05:04 GMT -5
I have a 2014 KZ Durango 2500, model 336RE. I need to replace the original vacumn breaker/check valve on my holding tank flush system.
Can any of you tell me where the valve is located, and offer tips on replacement, including recommended hardware that would be better than the original?
Thanks!
|
|
|
|
Post by johnr on Mar 1, 2019 15:32:01 GMT -5
I have a 325RL, and mine is in the cabinet under the bathroom sink. If you look at the back of your your water panel, you should be able to see where the pipe enters the coach. Look in a cabinet inside, right above there.
Why do you think you need to replace it?
|
|
|
|
Post by RdRmr on Mar 1, 2019 15:40:59 GMT -5
Dragonflight,
In pictures I've seen regarding the 2014 Durango 336RE the access hole for the anti siphon device is located below the bathroom shower hot and cold valve, unscrew the 4" plastic cap and it should be right behind it. Easy to replace, you have evidence of a leak?
That is where mine is located , 2016 Durango 2500 315RKD.
Happy Campin....
|
|
|
|
Post by lynnmor on Mar 1, 2019 19:19:24 GMT -5
They all leak under certain conditions, I eliminated the stupid thing. If you have a check valve where the flush hose is connected, then it should be safe. If you want an extra margin of safety, use a vacuum breaker on the hose.
|
|
