|
|
Post by dmintz on Jun 5, 2018 20:25:10 GMT -5
It all started when I had company come out here to move 2000 KZ Sportsmen I am a newby learning on fly so transport people unblock rv start hooking to hitch tell me to bring slide in my slide moves 2 feet and stops. Now no noise no nothing. For last week I have taken battery out had recharged tried to give additional power by hooking up to my car battery changed in line fuse found master slide button in cabinet above reg slide. Nothing works we were finally told to take motor off that it was acting like a (BRICK) so hubby bought grinder and cut motor off. Now I was expecting to be able to push slide in But No slide still cannot be moved with NO MOTOR. Somebody just shoot me and then HELP.
|
|
|
|
Post by Chuck on Jun 8, 2018 13:35:34 GMT -5
Can you tell us what models Sportsman you have ....
There should be a fitting on the slide mechanism that you can put a socket on an using a drill close
the slide ...
There also maybe something in the way, an obstruction, slide run on gears an if there is something
in the gears then what your talking about will happen ... I would have tried opening the slide
before cutting the motor off an look to see if there was anything in the way, now you have to
try pushing it open to check for such ...
Good luck
Chuck
|
|
|
|
Post by Edd505 on Jun 8, 2018 16:04:56 GMT -5
Shouldn't have to cut it out, it's a replaceable item. Low power ie battery near dead, obstruction like check said, bad connections between battery and motor, bad switch. Going to take some trouble shooting.
|
|
daycruiser
Newbie RV’er
Not really a newbie, over 40 years RVing, owned all classes of RV at one time or another.
Posts: 5
|
Post by daycruiser on Jun 27, 2018 8:15:57 GMT -5
I think a Mobile RV Tech would have been a good course of action in this case.
|
|
|
|
Post by Chuck on Jul 3, 2018 10:21:57 GMT -5
dmintz Have you solved your problem an if so what was it so other may learn from your experience with this problem  Chuck |
|
