Post by theclarks on May 23, 2018 16:26:08 GMT -5
Hello all! We had a dilemma with our toy hauler...no good place to store the dump hoses. Yes there is small one that is provided but the commercial hoses that we bought don’t fit them. So we came up with this. It is so simple and I am sure the mounting spots will have to vary but it works great. I figured there are others out there that have the same issue and this was so easy I couldn’t not share.
We used
2- 8ft triple walled 2 hole pipes. The kind that have a wider mouth on one end. They are intended for another pipe end to fit into it but it worked great for the larger side of the dump hose that connects to the drain.These have holes pre drilled in them. Which makes rinsing them and ventilation for the pipes great.
2- 4” test plugs. The kind that have a rubber rings that screws tight and expand when tightened.
2- 4” pipe caps
1 roll of metal tape with self tapping screws. A few zip ties to help hold it in place.
I fancied it up with the metal rope for the caps so they wouldn’t get lost.
We mounted it to a cross beam.
We used
2- 8ft triple walled 2 hole pipes. The kind that have a wider mouth on one end. They are intended for another pipe end to fit into it but it worked great for the larger side of the dump hose that connects to the drain.These have holes pre drilled in them. Which makes rinsing them and ventilation for the pipes great.
2- 4” test plugs. The kind that have a rubber rings that screws tight and expand when tightened.
2- 4” pipe caps
1 roll of metal tape with self tapping screws. A few zip ties to help hold it in place.
I fancied it up with the metal rope for the caps so they wouldn’t get lost.
We mounted it to a cross beam.
