|
|
Post by Texasdeere on Feb 12, 2018 11:10:40 GMT -5
Hey Guys,
2014 Durango Goldrush Discovery
I am planning to do a faucet upgrade in my Goldrush. I am wanting install a residential faucet and a sprayer to the counter top.
Does anyone know what the "solid surface countertop" material is or similar to?
|
|
|
|
Post by Edd505 on Feb 12, 2018 20:55:37 GMT -5
|
|
|
|
Post by jetzen on Feb 13, 2018 9:26:44 GMT -5
Was told by the KZ Durango product managers that it is a thinner version of the residential LG HIMACS solid surface counter tops.
|
|
|
|
Post by Texasdeere on Feb 18, 2018 9:53:36 GMT -5
Thanks Guys,
I'm pretty nervous about cutting into the countertop. I am going to buy a nice stainless residential faucet for the kitchen and bathroom sink and just skip the sprayer for now. It has the factory installed pull down in it now. Just personal preference but I just don't care for the pull down style for some reason.
|
|
|
|
Post by Chuck on Feb 18, 2018 11:15:01 GMT -5
Had to replace our faucet in the house the other day, looking on line, the upper end residential faucets were
running $300 or more Ugh !!
So I went to my local ACE hardware, got a really nice stainless residential faucet for under $150 with a hand
cleaner attachment, so much for cheaper on line, same product for half the price, guess ACE is the place LOL
Chuck
|
|
|
|
Post by ifulltime on Feb 18, 2018 12:27:19 GMT -5
Thanks Guys, I'm pretty nervous about cutting into the countertop. I am going to buy a nice stainless residential faucet for the kitchen and bathroom sink and just skip the sprayer for now. It has the factory installed pull down in it now. Just personal preference but I just don't care for the pull down style for some reason. Just use a good sharp hole saw and check on underside before cutting and you should be fine. Installed a RO faucet and was apprehensive about cutting the countertop. It cut like butter.  |
|
|
|
Post by Texasdeere on Mar 1, 2018 9:59:05 GMT -5
Ok I got some courage back and went for it. The material cut well, and everything turned out very nice. I installed Moen stainless faucets in both the bathroom and kitchen. I used a hole saw and cut slowly to keep the heat down and vacuumed up the material as I cut.
|
|
|
|
Post by Chuck on Mar 1, 2018 12:27:20 GMT -5
Cool, glad you made out well Safe travels an don't forget about the Kz rally, would be a good place to show off your handy work  Chuck |
|
