winegard wall plate #7042

ronrr
Newbie RV’er

Posts: 1

winegard wall plate #7042 Oct 6, 2017 14:39:24 GMT -5

Quote

Post by ronrr on Oct 6, 2017 14:39:24 GMT -5

My name is ron and we just purchase 2007 KZ sportsmen M3102
there is no antenna power. I have located where it is to be and it appears that someone has removed it.
I have purchased a new wall plate. My problem is I do not know which cable goes where.
One coax cable has red tape on it and another has green tape on it.
I know where the 12 volt wires go.
I have tried KZ support and get no help at all.

lynnmor Professional RV’er Posts: 1,683	winegard wall plate #7042 Oct 6, 2017 17:38:32 GMT -5 via mobile Quote Select Post Deselect Post Link to Post Back to Top Post by lynnmor on Oct 6, 2017 17:38:32 GMT -5 Remove the cables from the wall plate. Short a cable from the center conductor and check for continuity at the outside cable connection. If it tests shorted, that is it. Then check the other cable the same way.

Chuck
Professional RV’er

Ford F350 CC LB DW 4x4 Amateur Radio call W5KAV

Posts: 3,311

winegard wall plate #7042 Oct 8, 2017 16:25:10 GMT -5

Quote

Post by Chuck on Oct 8, 2017 16:25:10 GMT -5

ronrr

Did you email or call Kz Customer Support, calling is much better than emailing take from someone
who knows ... Also if you didn't buy you unit from a Kz dealer you might try finding one near
you or a reliable RV repair shop can help you for sure.

As Lynnmor has stated " Remove the cables from the wall plate. Short a cable from the center conductor and check for continuity at the outside cable connection. If it tests shorted, that is it. Then check the other cable the same way".

Good luck an lets us know how it turns out so other can benefit from you experience

Safe travels

Chuck

Ford F350 CC LB DW 4x4 Amateur Radio call W5KAV

Post by ronrr on Oct 6, 2017 14:39:24 GMT -5

Post by lynnmor on Oct 6, 2017 17:38:32 GMT -5

Post by Chuck on Oct 8, 2017 16:25:10 GMT -5