|
|
Post by grandpa on Jun 9, 2016 7:44:15 GMT -5
How difficult is it to install? Trailer is a Sportsman classic 18RBT and TV is a 2006 mercury mountaineer V6 4.0 L. What are the key points to know and what system to use. Trailer is 2700#'s and TW is 340#'s. TV is 4700#'s.
Thanks |
|
|
|
Post by larryg on Jun 9, 2016 10:19:05 GMT -5
I assume you have a 2" receiver on the tow vehicle, if not it is probably not possible
installing a WDH hitch is not specific to vehicle. proper setup is and may take multiple tries and best to use a scale to verify.
For initial setup or without a scale the most important thing is to measure front bumper height in position to hook up but not touching the trailer then hooked up with load bars in place, the should not be any higher loaded and could be a little lower. if the front is high you need more tension on the bars and/or more head angle
|
|
|
|
Post by grandpa on Jun 9, 2016 15:29:57 GMT -5
Thanks for the information.
|
|
