abs
Weekender RV’er
Posts: 65 
|
Post by abs on Nov 25, 2015 11:40:15 GMT -5
We leave our camper at an RV park, and when setting it up, I often wonder should I have taken the weight off of the wheels and tires by blocking up under the frame near the axels. Right now I have it blocked up just enough to level the camper. Any thoughts on getting the weight off of the wheels and tires?
|
|
|
|
Post by vagov on Nov 25, 2015 19:31:04 GMT -5
My thought would be The camper weight on the wheels should be fine. As long as you dont overload the axle. But putting them on blocks or a wood plank. Will help reduce flat spots. From sitting on same spot for long periods of time.
|
|
|
|
Post by paroadking1 on Nov 25, 2015 19:42:47 GMT -5
My thought would be The camper weight on the wheels should be fine. As long as you dont overload the axle. But putting them on blocks or a wood plank. Will help reduce flat spots. From sitting on same spot for long periods of time. This is especially true if you are running bias ply tires. |
|
