|
|
Post by linehan55 on Apr 19, 2024 8:26:24 GMT -5
Hello all
New to the RV world. Have a 2021 C241RLK
Heater will start and run for a period of time then down. While running have very little air flow at floor vents. Have the cold weather pkg so can’t I inspect the ductwork. Wondering if the poor air flow is causing the problem ?
Anyone else experiencing this ?
Thanks for any advice
|
|
17600
Weekender RV’er
Posts: 72
|
Post by 17600 on Apr 19, 2024 12:58:13 GMT -5
Have you checked the intake side something could be clogging it there as well. If it is clear, you can try taking the vent cover off then get a mirror and a flashlight hopefully that will allow you to see at least part of the duct work.
|
|
|
|
Post by nomad1955 on Apr 19, 2024 20:17:54 GMT -5
Not sure about the air flow problem until you check the ducts. But I know the problem of it shutdown early. We have a 2022 Connect 241RLK and it also would shutdown early. Didn’t take me long to discover why!!! The rocket scientist engineers at Connect placed a heater vent directly below the Analog thermostat. When the heater turns on it satisfies the thermostat early. I blocked of the vent and changed the stat to a Airxcel digital stat. Problem solved and no problems for 2 years now.
|
|
WrkrBee
Newbie RV’er
Retired
Posts: 46
|
Post by WrkrBee on Apr 19, 2024 20:46:52 GMT -5
From Amazon: USB Snake Inspection Camera, 5.5mm Endoscope Camera with 6 Adjustable LED Lights, 2.0 Megapixels HD IP67 Waterproof Borescope Camera
Pick up one of these $10 phone borescopes to play with. Send it down your ducts to see if they are crimped or full of construction debris. Could be both.
|
|
|
|
Post by nomad1955 on Apr 19, 2024 21:27:37 GMT -5
The new digital thermostat I installed was Airxcel Digital Thermostat Black - Model # 94303382-FCRVM
|
|
|
|
Post by jayhawk500 on Apr 21, 2024 18:58:26 GMT -5
Not sure about the air flow problem until you check the ducts. But I know the problem of it shutdown early. We have a 2022 Connect 241RLK and it also would shutdown early. Didn’t take me long to discover why!!! The rocket scientist engineers at Connect placed a heater vent directly below the Analog thermostat. When the heater turns on it satisfies the thermostat early. I blocked of the vent and changed the stat to a Airxcel digital stat. Problem solved and no problems for 2 years now. I did this too. |
|
