|
Post by obrienp23 on Aug 11, 2022 20:27:07 GMT -5
Wondering if anyone else has had a problem with the COnnexx/Furrion TV in the newer model KZ Connect? Normally we plug into park cable and if you select the TV input the channels just are there. We just came back from Wilmington, NY and our TV was working on cable, we've never had a problem before that anywhere. But now back on our seasonal site it just goes to the blue screen and says "Run Channel Auto Scan". If you run the scan it doesn't pick up anything and just returns you to the same blue screen and message about auto scan. I've made sure all the connections are good everywhere. I've rolled through the setting menu without much luck.
|
|
|
Post by Edd505 on Aug 13, 2022 22:59:09 GMT -5
are you sure there is OTA TV? I live in the out back and there is one or two OTA channels.
|
|
|
Post by hihosilver on Aug 14, 2022 16:21:17 GMT -5
On our 2018 241RLK I have to move the cable to the TV from the "cable" plug to the "antenna" plug and then make sure the antenna amplifier is in the "on" position. The plate the connections ans amplifier switch are on is behind and under the TV.
|
|
|
Post by carolinapanther on Aug 31, 2022 18:48:05 GMT -5
Thank you for the information on the antenna/cable plugs. I moved the coax cable from the top coax connector to the bottom (which on our 272FK is the “antenna” connector, ram the auto channel scan and voila! I have 50 TV channels just sitting in our yard. Can’t wait to try it out the next camping trip!
Again, thanks for the information.
|
|