|
|
Post by lrhogusa on Oct 15, 2021 9:57:32 GMT -5
Hello All
Was finding evidence of water streaming across floor then found living room slide out top stripping partly bent inside instead of all the stripping facing out.
I pulled the stripping out and now it is warped and not sealing against slide out when in the out position.
Is there a trick to reform-relearn original shape of rubber or should whole strip be replaced?
Thank You, Roy
|
|
|
|
Post by nvguy on Oct 16, 2021 21:21:31 GMT -5
Without pictures, it's hard to tell which seal is warped, but if the seal is that badly warped you're probably going to have to replace it.
|
|
|
|
Post by Edd505 on Oct 17, 2021 19:59:30 GMT -5
|
|
|
|
Post by lrhogusa on Oct 19, 2021 8:31:47 GMT -5
At Steel Rubber I keep getting 0 items found for "rv slideout seal"
Talking to them and they need pictures too.
Makes me wonder who sells this stuff to KZ LOL
|
|
|
|
Post by Edd505 on Oct 21, 2021 21:22:32 GMT -5
At Steel Rubber I keep getting 0 items found for "rv slideout seal" Talking to them and they need pictures too. Makes me wonder who sells this stuff to KZ LOL I found multi slide seals what shape is yours? Pictures tell a lot and may show which one you need. |
|
|
|
Post by lrhogusa on Oct 31, 2021 9:39:51 GMT -5
Hello All
The rubber seal form is good again after having the slide inside for a few days. I bought a rubber seal protectant
|
|
|
|
Post by lrhogusa on Jul 3, 2022 8:22:41 GMT -5
**Update** My weather stripping was not deploying in-out properly. I saw a video of 2-sided taping pieces of clear plastic wall corner protectors on the slide-out walls. www.youtube.com/watch?v=NYv_8IT-tFY |
|
|
|
Post by Edd505 on Jul 3, 2022 21:19:27 GMT -5
the wiper seal can be checked and I use a broom handle if it does stick coming out, insert under and slide up, that plastic could tear the seal.
|
|
|
|
Post by lrhogusa on Aug 14, 2022 9:07:17 GMT -5
the wiper seal can be checked and I use a broom handle if it does stick coming out, insert under and slide up, that plastic could tear the seal. The plastic when rounded at corners to avoid tearing up the seals is working great. YAY! |
|
