|
|
Post by Edd505 on Feb 25, 2021 19:25:06 GMT -5
Washing the RV today and found a loose fender bracket, good thing I did. I found 4 what look like lag bolts backed out of the slide rail about 1/4 inch. Not sure if they came loose or never got tight but no two were at the same angle, come on how hard is it to put bolts in straight?
|
|
bobnmonica
Seasonal RV’er
2020 GMC Diesel Denali Dully, Durango Gold MBQ 382
Posts: 101
|
Post by bobnmonica on Feb 25, 2021 22:02:52 GMT -5
It too me 5 hours but snugged up all the screws externally on my rig, many, many loose
|
|
|
|
Post by laknox on Feb 26, 2021 10:33:01 GMT -5
Washing the RV today and found a loose fender bracket, good thing I did. I found 4 what look like lag bolts backed out of the slide rail about 1/4 inch. Not sure if they came loose or never got tight but no two were at the same angle, come on how hard is it to put bolts in straight?
Bet that, to the people building it, they =were= straight. I doubt the workers were, though. Lyle |
|
|
|
Post by Edd505 on Feb 26, 2021 21:23:47 GMT -5
It too me 5 hours but snugged up all the screws externally on my rig, many, many loose I find a few loose inside all the time but these were the first outside. I did have one of the leveler sensors fall off which screwed the system completely, took a couple days to run it down taking with the Lippert techs. |
|
